All-in-One Sealant & Adhesive

SKUColourPack QtyQuantityPrice


£8.02 inc vat
£6.69 ex vat


WhiteBox of 12
£86.70 inc vat
£72.25 ex vat


£9.94 inc vat
£8.29 ex vat


ClearBox of 12
£107.43 inc vat
£89.53 ex vat


£8.86 inc vat
£7.39 ex vat


BlackBox of 12
£95.77 inc vat
£79.81 ex vat

All-in-One Sealant & Adhesive is available for next day delivery from Brighton Tools

34mm Multi Tool Saw Blades - Brighton Tools

Brighton Tools & Fixings "All-in-One" MS Polymer® Adhesive & Sealant is based on Modified Silane Technology.

This is an all in one, multi purpose, fast curing, high strength grab adhesive & sealant used for general purpose construction, Modular building applications and vehicular bonding of Stone, Concrete, Wood, Brick, Glass, Mirrors, Stainless Steel, Zinc, Aluminium, Gypsum Board & most plastics.

It does not shrink and is resistant to UV radiation, chlorine, mould and general weathering.

Adhesion to almost all surfaces internally and externally without primer is excellent and will even bond in the wet to damp surfaces.

• The all-in-one solution
• Available in White, Clear or Black
• Free of Solvent, Silicone & Isocyanates
• Low odour and free of Volatile Organic Compounds
• Bonds in the wet
• Paintable

Adheres to:
Metal - Wood - Lead - Zinc - Copper - Stone - Marble - Granite - Brick - Polystyrene - Glass
Can be applied in Damp & Wet conditions
Skinning Time:
Approx. 45 minutes {at 23°C & 50% relative humidity}
Can be painted when Tack Free
Movement accomodation ±20%
Mould  resistant
Life Expectancy:
Allinone has in excess of 20 years when applied correctly

Directions of use:
Surfaces to be sealed must be clean, and free from dust, dirt, frost, grease and other contamination. Cut the cartridge tip and applicator nozzle to the required diameter, screw nozzle onto cartridge. When
using as an adhesive: Apply product in small blobs or a continuous wavy bead along the surface to be bonded, offer up firm into position before skin forms. When using as a sealant: To achieve a clean finish, apply masking tape to adjacent areas where potential exuded adhesive is not wanted. Apply sealant with applicator gun ensuring good surface contact is achieved. Wash hands after use.


In a cool dry environment, product can be stored for 12 months from its
production date in original unopened container, at temperatures between
+2C and +25C.

MUST not be used to seal aquariums or joints subject to continuous
water immersion. It is always the user’s responsibility to determine
suitability of use. It is not recommended for use in areas subject to

Use only in well-ventilated areas and avoid contact with skin and eyes.
In case of contact with eyes, rinse immediately with water and seek
medical advice. Wear suitable protective clothing and gloves. Keep out
of reach of children. A safety data sheet is available on request.