Trend LOCK/JIG Contractors Lock Jig

Code: LOCK/JIG
£81.47 ex vat
£97.76 inc vat

The Trend LOCK/JIG Contractors Lock Jig is available for next day delivery from Brighton Tools

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.

  • For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
  • Deeper mortises can be achieved with a suitable size of auger bit.
  • Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
  • Steel plates & body.
  • An auger bit and drill is required to complete deep mortises.
  • The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

Door thickness min.34 mmDoor thickness max.58 mmTemplate outer size234.3 x 59.8 x1.5mm

Includes templates for locks having the following face-plate dimensions:

Metric (Imperial approx.) (D x OL)Template22.2x156 mm (7/8"x 6 1/8")122.5x152.5 mm (7/8"x 6")225.4x121 mm (1"x 4 3/4")325.4x127.5 mm (1"x 5")425.4x133.5 mm (1"x 5 1/4")525.4x145 mm (1"x 5 3/4")625.4x153 mm (1"x 6")725.4x156.5 mm (1"x 6")825.4x165.5 mm (1"x 6 1/2")925.4x177 mm (1"x 7")1025x57.5 mm (1"x 2 1/4")11 UPPER26x56.5 mm (1"x 2 1/4")11 LOWER25.6x162mm (1"x 6 3/8")12

Mortise Lock Dimensions

Imperial (Metric) (D x OL)Template16x72 mm* (5/8" x 2 7/8")A16x107 mm* (5/8" x 4 1/4")B19x78 mm* (3/4" x 3 1/8")C19x109 mm* (3/4" x 4 1/4")D