ORANGE 240 ACRYLIC SEALANT

Stock Code: ORANGE240

75 In Stock

£3.83 (exc VAT) per EACH
£4.60 (inc VAT)

Quantity Ordered	Price per EACH
1 - 24	£3.83
25+	£3.51

Quantity: - +

Descriptions

Orange 240 Acrylic Sealants are available for next day delivery from Brighton Tools

Orange 240® Acrylic is a Halogen Free Sealant that when used in conjuction with Blue60 can be used to fill the gaps below 4mm and can also if required be used to over cap the Blue60 to provide a paintable finish and will give up to 1 hour fire and smoke protection. this type of installation should used Blue60 fire rated packers in every case. This combined installation will offer excellent thermal and acoustic properties.

Orange 240® has been tested in concunjuction with Blue 60® for 30 and 60 minute door installation scinarios

Directions for use:

Surfaces to be sealed must be clean, dry and free from dust, dirt, frost, grease and other contamination. In situations where an especially neat finish is required, use masking tape to cover the face edges of the joint and remove immediately after filling / smoothing has been completed. Cut both the cartridge tip and applicator nozzle to the required diameter and angle, screw nozzle onto cartridge.

Apply sealant with applicator gun ensuring good surface contact is achieved by forcing sealant into the joint to be sealed. If necessary, use a backing material to control sealant depth. Smooth within 5 minutes of application using a spatula dipped in soapy water, apply sufficient pressure to ensure good contact of the sealant against the joint surfaces. Clean tools with water immediately after use. Wash hands after use.

When using Orange240 around a fire door whether in conjuction with Blue60, or not, the frame must be packed into position using Blue60 fire rated packers

Certification

BS 476 Pt : 22

BS EN 1634-1 2014 + A1 2018 (frame perimeter)

Acoustic properties: BS EN ISO 10140-2:2010.

EN1634-3 Smoke Test

Emission Performance: Eurofins VOC Indoor Air Comfort GOLD, VOC M1